SAMRAT PLYWOOD LIMITED
 
 

 Home Page
 Company Profile
  Showroom
     Plywood
     High Pressure Laminates (Mica)
     Veneer
     Flush Door
     Block Board
     Shuttering Plywood
Marine Plywood- IS 710

Product Code : MP IS710

[Select]
Product Specification

Marine Plywood- IS 710

Samrat's marine plywood is made of selected hardwood. Since no rubber or inferior wood is used for the manufacture of this plywood, it is more resistant to water and insect attack. Further, the finished plywood is subjected to chemical treatment for overall protection against insects, borers, termites and fungus.

All manufacturing details as mentioned in Marine Plywood

Sr. No.


Details



1.


Made from uniform quality veneer selected hard wood species


2.


The Veneer are bonded with phenol formaldehyde bwp grade resin under high temperature & pressure


3.


Treated with fixed type preservatives under vacuum pressure to ensure protection from attack by micro organisms


4.


Specific stress receiving treatment given to check anti-warp properties which keeps it dimensionally stables in both excessive wet & dry condition through out its life

Advantage

Borer proof & termite proof

Application

Sr. No.


Details



1.


Furniture


2.


Ship Building


3.


Panelling / Partitions / Ceiling / Wardrodes / Counters


4.


As require

Application

Sr. No.


Tests


Results



1.


Moisture Content


5% To 10 %


2.


Glue Sheer Strength (Dry State)


More than 1350 N


3.


Adhesion of plies


Excellent


4.


Water Resistant Test Water for 3 hours


a) Indv.Min-784.5 (confirms to specified requirements)

b) Average - 980.7 (confirms to specified requirements)


5.


Glue Shear Strength


Excellent


6.


Adhesion of plies


Excellent


7.


Tensile Strength




a. Parolee to grain


more then 450 kn. / m2




b. Right angle to grain


more then 250 kn. / m2


8.


Mycological Test


a. No Separation at edges after 21 days of exposure to micro organism

b. Shear strength more than 1000 N


9.


Specific Gravity


0.70 to 0.75


10.


Water Absorption screw holding strength


more than 250 kgs.


11.


Nail Holding strength


more than 250 kgs.

Other Products in 'Plywood' category
WWR Grade Plywood
WWR Grade Plywood
BWR Grade - IS:303
BWR Grade - IS:303
Plywood
Plywood
Gurjan Plywood
Gurjan Plywood
MR Grade Plywood
MR Grade Plywood
 
<< Back
 
 
The membership of this company with Tradeindia has expired. To view other companies related to this industry, kindly Click Here
Copyright © 2009 by SAMRAT PLYWOOD LTD. All Rights Reserved.